Skip to content

myta 36b

Luxled industrial lighting

MYTA 36
MYTA 36 frontal profile

MYTA 36B

MYTA 36B is the basic version of this industrial ceiling light. With a simple and linear aesthetic MYTA 36B is the ideal solution for applications in environments with heights up to 6 meters high; therefore perfect for laboratories and technical studios where uniform and precise lighting is required.

With only 90 W of power and a yield of 12,635 effective lumens it is perfect and discreet mounted adhering to the ceiling.

For a better performance see the MYTA 36BD version

  1. 36 power LED
  2. front dissipation
  3. ultraclear optical SILICONE optics
  4. 3 different optics depending on the application
  5. reinforced aluminum front
  6. external power supply
  7. available in 4000k and 5000k temperatures
  8. 2 fixing solutions(see)

TECHNICAL DATA

DESCRIPTIONVALUE
AVERAGE POWER90W
SUPPLY VOLTAGE180 280 VAC 50/60 Hz
PFC0.99
LIGHT SOURCE36 POWER LED
NOMINAL FLOW OF LEDs14.040 lm
REFERENCE FLOW12.635 lm
COLOR TEMPERATURE4000K (5000K)
COLOR RENDERING80
LENSESSILICONE
OPTICSMEDIUM / WIDE / EXTRA-WIDE
DIMENSIONS416X416X50 mm
MATERIALPA6.6 / ALUMINIUM L 5754
INSULATION CLASSI
WEIGHT4.0 KG
DEGREE OF PROTECTIONIP65
WORKING HUMIDITY0 98% R
LIFETIME> 60.000 h L80

MYTA 36B optics

find out how many lamps you need for your environment! request a lighting project, it’s free!

fill out the form below

MYTA 36bd

Luxled industrial lighting

myta 36bd

MYTA 36BD is the ADVANCED AND COMPLETE version of this ceiling light. The device, unlike MYTA 36, is in fact equipped with electronic control. With the electronic control, the ceiling light can:

  • Dimming autonomously, without the need for a dat cable. Dimming takes place autonomously, lamp by lamp, thanks to a sensor placed in the center of the ceiling light that detects the ambient brightness and, based on it, makes a gradual and slow reduction (for safety reasons on the work this happens in about 4 minutes) luminous flux to adapt it to the detected ambient light. This sensor has been called by us precisely AUTODIMMER; the autodimmer allows, in rooms with windows and glass doors, a saving of25-30% compared to non-dimmed lighting, as well as obviously a longer life of the ceiling light.
  • The electronics on board the lamp also allows the control of the life of the LEDs, in fact these are, in the initial phase, slightly weakened and, in the phase of decay of the LED flux over the years, this weakening is gradually diminishing, I ask the lamp a CONSTANT FLOW with VARIABLE POWER.
  • The electronics also allow you to set a desired power, starting from the initial one set in the data sheet, if the customer wants a less powerful and less performing product in terms of light.
  • The electronics also allow interfacing, together with a suitable LED DRIVER, with DALI technology, if the customer is already equipped with industrial home automation.

  1. 36 power LED
  2. front dissipation
  3. ultraclear optical SILICONE optics
  4. 3 different optics depending on the application
  5. reinforced aluminum front
  6. integrated power supply
  7. available in 4000k and 5000k temperatures
  8. SELF-DIMERATION
  9. CONSTANT FLOW at VARIABLE POWER
  10. DALI interfacing
  11. 2 fixing solutions (see)

TECHNICAL DATA

DESCRIPTIONVALUE
AVERAGE POWER80W
SUPPLY VOLTAGE180 280 VAC 50/60 Hz
PFC0.99
LIGHT SOURCE36 POWER LED
NOMINAL FLOW OF LEDs14.040 lm
REFERENCE FLOW12.635 lm
COLOR TEMPERATURE4000K (5000K)
COLOR RENDERING80
LENSESSILICONE
OPTICSMEDIUM / WIDE / EXTRA-WIDE
DIMENSIONS416X416X50 mm
MATERIALPA6.6 / ALUMINIUM L 5754
INSULATION CLASSI
WEIGHT4.0 KG
DEGREE OF PROTECTIONIP65
WORKING HUMIDITY0 98% R
LIFETIME> 60.000 h L80

MYTA 36BD optics

ARE YOU A DESIGNER?
DOWNLOAD OUR PHOTOMETRIC FILES!

THE Fixing SOLUTIONS

industrial lighting luxled, myta 36b and myta 36bd

MYTA 36 is a lighting fixture for indoor environments, which can be installed on the ceiling, in adherence or suspended; at a recommended height of between 2 and 5.5 m from the floor; in a position that can only be reached by qualified technical personnel. To install the MYTA 36 device, the following solutions are basically envisaged.

INSTALLATION ON BUSWAY

The MYTA 36 device is equipped with a bracket (figure opposite) that can be removed by removing the 2 screws visible on the front. Then remove the bracket; fix the bracket to the busway using only accessories compliant with approved or better supplied by the busway manufacturer. Reposition the device on the bracket. If the fixing accessories can be fixed to the bracket without removing it from the appliance, it is not necessary to disassemble and reassemble it. (photo opposite).

ceiling installation

Ceiling installation is the most common; to perform it, it is necessary to remove the bracket from the appliance by unscrewing the 2 M5 screws; for the operation use a hexagonal wrench # 3. When the bracket is separated from the luminaire, identify the most suitable holes in the bracket to fix it to the ceiling. The choice of holes and screws or accessories for fixing must depend on the material in which the ceiling is built; in this regard, consult a technician expert in the field and comply with the rules of the installation sites. When the bracket has been fixed, make the electrical connection and then reposition the device on the bracket.

are you interested in this product?

Send us an email (info@luxled.it) or fill out the form on the side, you will be contacted shortly!

This website uses technical and profiling cookies. Clicking on "Accept" authorises all profiling cookies. Clicking on "Refuse" or the X will refuse all profiling cookies. By clicking on "Customise" you can select which profiling cookies to activate.
Warning: some page functionalities could not work due to your privacy choices