STL sport professional
LUXLED SPORT LIGHTING
STL sport professional
The STL SPORT PROFESSIONAL -line, in addition to the standard electronic control and the special brackets that allow easy and precise positioning, it stands out from all the LED projectors on the market, for the unique characteristic of all the STL products, consisting of the sandwich-mounted silicone optics between the front and the heat sink, both in aluminum. The result is a much more efficient product than common LED technologies, with very little light scattering and low light pollution and, above all, low glare to players and spectators.
These are three bodies, STL SP1, STL SP2, STL SP4, with power of 250W, 500W and 1000W.
They are suitable for lighting professional playgrounds.
- 96/192/384 power LED
- front dissipation
- ultraclear optical SILICONE optics
- 3 different optics depending on the application
- reinforced aluminum front
- integrated power supply
- available in 5000k and 4000k temperatures
stl SP1, stl SP2, stl SP4 projectors
|DESCRIPTION||STL SP1||STL SP2||STL SP4|
|SUPPLY VOLTAGE||100÷ 305 VAC 50/60 Hz||100÷ 305 VAC 50/60 Hz||100÷ 305 VAC 50/60 Hz|
|LIGHT SOURCE||96 POWER LED||192 POWER LED||384 POWER LED|
|NOMINAL FLOW OF LEDs||32.000 lm||64.000 lm||128.000 lm|
|COLOR TEMPERATURE||5000K (4000K)||5000K (4000K)||5000K (4000K)|
|OPTICS||NARROW, MEDIUM, WIDE||NARROW, MEDIUM, WIDE ||NARROW, MEDIUM, WIDE|
|DIMENSIONS||330X300X115 mm||660x300x120 mm||660x600x125 mm|
|MATERIAL||ALUMINUM / STAINLESS STEEL||ALUMINUM / STAINLESS STEEL||ALUMINUM / STAINLESS STEEL|
|WEIGHT||8.3 KG||16.2 KG||32.3 KG|
|DEGREE OF PROTECTION||IP67/IP68||IP67/IP68||IP67/IP68|
|WORKING TEMPERATURE||-30° +50° C||-30° +50° C||-30° +50° C|
|LIFETIME||≥60.000 h L80||≥60.000 h L80||≥60.000 h L80|
STL SPORT PROFESSIONAL OPTICS
find out how many lamps you need for your playground! we make you a lighting project for free
Fill in the form below
SPORT lighting luxled
UNBEATABLE SILICONE EVEN FOR OUTDOORS
More transparent than glass, more resistant to UV; indestructible to shocks, resistant to solvents, operating from -40 ° C to + 200 ° C, allows you to create optics with incomparable efficiency and precision, this is optical silicone. LuxLED uses ultra clear by purchasing it directly from the parent company.
Being the best material for gaskets and seals, we also used it to guarantee IP68 protection for LEDs. With just one component we have made the primary lens, the secondary lens and the total protection of the LEDs.
Since their inception, luminaires have always used glass. In some products the glass has been replaced by plastic materials but this has only made the situation worse. The heat, which is consistent in LEDs, is dissipated only from the rear of the device. The great innovation of LuxLED was to replace glass and plastic with aluminum and these are the advantages:
– heat dissipation doubles
– the problem of the fragility of glass or plastic disappears
– dust and dirt, which over time settle on the heatsink, do not affect the STL device because it dissipates heat even from the front
– the thermal stresses, typical of products with glass and plastic and which are the main cause of humidity infiltrations, are eliminated
ARE YOU A DESIGNER?
DOWNLOAD OUR PHOTOMETRIC FILES!
WANT MORE INFORMATION?
Send us an email (email@example.com) or fill out the form opposite, we will contact you as soon as possible!